Lubes/Cleaners

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

- Ultra-Clean, waterproof formula chain lube designed for use in dry conditions - Surface active chemistry promotes smooth shifting under load, quiets chain noise and significantly improves life of drivetrain - Fast penetration and setup promotes a clean, trouble-free operating environment in dry, dusty conditions

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes. - Doesn't absorb water - Lubricates entire braking system

The #1-selling penetrant since 1957, PB B'laster quickly busts loose rusted, or frozen parts caused by rust and corrosion. It also contains a non-evaporating lubricant that saves time and equipment and protects against further rust and corrosion. Features - #1-Selling Penetrant - Breaks Free Rusted or Frozen Parts - Protects Against Further Rust and Corrosion - Use on Automotive, Industrial, Marine, Plumbing & Other Equipment - New ProStraw® with Control Flow Technology® (part# 16-PB-DS)

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

Titanium is a super-light, exceptionally strong material that's great for bicycle frames and components, yet it requires a little special care for the best results. To stop cold-welding, galling or seizing of titanium components and fasteners, Finish Line offers Anti-Seize Assembly Lubricant. It's a premium blend of synthetic oils, graphite, bronze, copper and aluminum complex and works great as a conventional anti-seize for aluminum, stainless steel, and other specialty metals, too. - Works on all metals, but highly recommended when attaching reactive metals like titanium, aluminum, stainless steel and specialty alloys and magnesium - Prevents cold-welding, galling, and seizing of metal to metal contact parts, especially those subject to high torque and moist conditions such as bolt threads, seat posts, pedals and bottom brackets - 3-Pack of 6.5cc Sachets

Designed to leave zero residue after application, Finish Line’s Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line’s Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. - Engineered to rapidly clean disc brake rotors and pads - Acetone-free formula

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Finish Line's Extreme Fluoro Grease is made with pure DuPont fluorinated ingredients for outstanding durability and unbeatable smoothness. It's recommended for use on precision parts, especially ceramic and conventional bearings, where you need maximum protection from the elements and heat. This low-friction grease even works great on cable wires, derailleur pivots, stanchions, pedal springs and other vital moving parts.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Additionally, it's very slick and tough and lasts as much as five times longer than petroleum grease.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!

Clean, polish and protect your prized ride with the advanced technology of Finish Line's Showroom Polish And Protectant. It restores and rejuvenates all surfaces and is safe for use on steel, aluminum, carbon fiber, titanium, plastic, rubber as well as clear coats. It dries to a clear hard film and helps keep your frame and components cleaner longer.

Finish Line® Speed Degreaser™ is the fastest way to clean a bicycle drivetrain. Dry-degreasing technology requires no water rinsing as it evaporates rapidly after application to leave no residue. It's innovative turbo sprayer uses mechanical agitation to blast away contaminants from metal components. Speed™ is formulated with advanced solvents to quickly breakdown grease, grime, dust, and dirt. For most applications Speed™ requires no additional brushes or tools. Speed™ leaves no residue so lubricants can be applied to the chain immediately after application. • Dry-degreasing technology requires no water rinsing • Innovative turbo-sprayer blasts away contaminants • Advanced solvents breakdown grease and grime • Dries rapidly to leave no residue • Leaves bicycle chains clean and ready for fresh lubrication